Brand Name: Hengsen
Model Number: Df/Q-Jc (JD)
Place of Origin: China
Product introduction
The DQ/F-JC(JD) series actuators are one of the electrical machine and matched with the DF/F-05 series valves. It also can be matched with the other vales by different linkers.
Feature
With low alternating current reversible synchronous motor, mag-netic clutch.
Operation transfered by the gear. The screw group is sustained by the axletrer which totated around the center axes. The center turn-buckle and the position scale are used on the valve shaft.
With the valve position indicator.
It can be added by two auxillary switches and one manual stem.
It is available for the journey of 15mm, 17mm or 19mm, 22mm.
Operation
The actuator is actuated by the 2-way synchronous motor. When the value is open or closed, it will generate the countedforce for the driver, that can turn off the microswitch inside, and the driver will stop working. When the driver receives the control signal, the valve will open a little and stop at any position without signal. The signal sent out by the increasing or proportional controller of the actuator can make the motor running clockwise or anticlockwise.